16-09-2021

Ncomputing Vspace License Crack

Ncomputing Vspace License Crack 265 DOWNLOAD (Mirror #1) Read More. Wondershare Drfone 201 License Key. February 12, 2018. Wondershare Dr.fone 2.0.1 License Key. Ncomputing Vspace License Crack this window must be filled in. License Crack 265. Ncomputing Vspace License Crack 265. Par Jasmine Lowe. Ncomputing vspace, ncomputing vspace download, ncomputing vspace toll free. Ncomputing Vspace License Crack 265. Ncomputing vspace registro.

Ncomputing Vspace Server
Ncomputing Vspace License Crack Free
Ncomputing Vspace Download
Vspace Manager

This article explains how to use locally connected printers. We suggest to use network printing and keep printers off the desktop infrastructure but there are situation where printing to locally attached printers in unavoidable.

1VDI Printing Background
- 1.1How is the print job transported to the client?
2Printer Configuration
3Printing scenarios

VSpace Pro Client for Windows. VSpace Pro Client software can be installed on devices running Windows 7 SP1 (32 and 64-bit), Windows 8.1 or Windows 10; vSpace Pro Client for Windows is specifically designed for vSpace Pro 10; Recommended minimum hardware requirements: Intel Pentium 4. Installing vSpace Client Access License Keys From your vSpace Server, open the NComputing vSpace folder form the Windows Start Menu and select vSpace Registration. From the registration wizard select “Get Additional Licenses.” You will be prompted for a license key, as seen below.

VDI Printing Background

When printers are connected to Thin Clients, there are these important questions to be considered:

How is the print job transported to the client?

Regular network printing

Most probably you are familiar with how network printers work. Either they have Ethernet or WLAN interfaces built in or you bought an extra 'print box', but basically they have an IP address and potentially a queue name. On the Windows side you would say 'TCP/IP printing' and make sure Windows knows about IP address and queue name. There are two different printing protocols:

LPD/LPR. This refers to the Line Printer Daemon protocol that has been around forever, more or less. All networked printers and printserver boxes support this.
Raw port 9100 printing. This is a protocol popluar with Windows, basically a TCP port will be opened and everything that arrives on this port will be passed on to the printer without interpretation (hence, it's called 'raw' printing).

NoTouch supports both of them, as does Microsoft Windows.

Printer forwarding

Some VDI protocols do add another option - they allow to send print jobs within their regular protocol - a feature called 'printer forwarding' or 'printer mapping'. For now only the RDP and ICA/HDX protocols can do this, thus this particular feature will work with Microsoft Remote Desktop services and Citrix products only. VMware Horizon can do that too (even though the PCoIP protocol natively does not do that), VMware has a 'logical printer forwarding' mechanism that is technically based on ThinPrint.

Where is the printer driver and where does the rendering take place?

You know that every printer comes with driver(s) and you know that drivers are usually installed inside a Windows operating system (and not inside a printer or a LAN print server or so). However, some people prefer to install printer drivers on endpoints instead of terminal servers / VDI desktops. Citrix for example calls this 'universal printing', inside the VDI Windows you don't have any printer driver then and leave everything to the endpoints. This may sound contradictory to the idea of slim endpoints.

In case of NoTouch, since NoTouch is based on Linux, instead of the normal Windows printer drivers so-called PPD files (available from printer manufacturers) serve as 'drivers'.

Advantages of keeping Windows printer drivers on the server/VDI side of things are:

End users see and work with familiar printer dialogs
Using original Windows drivers means all the printer's features can be accessed

How does USB device forwarding fit into the picture?

Well, not at all. If you use a VDI product that supports generic USB device forwarding and you forward a printer with that technology, NoTouch is not concerned with the device or the printing any more. Everything is done inside the Windows VDI desktop. If you intend on forwarding local printers via generic USB forwarding, stop reading here - this article does not apply.

Printer Configuration

The main printer configuration is located under 'Drivers/Printer', both locally on the client as in NoTouch Center. Several printer objects can be configured.

NoTouch OS

When working in the local configuration, click on 'Drives/Printers' and then either add a new printer object or edit an existing one. The configuration of a printer object looks like this: Pixel font editor free.

These are the parameters that can be set:

Printer name. This is an internal printer name. Most people are fine with the default name of 'printer'. Please do not use spaces or special characters. Just something like printer1, printer2, or so.
Port. This refers to where the printer is connected to:
- USB 1. The first found USB printer. Please note - USB ports are not numbered, so it does not matter to what port the printer is plugged into. If you have just one USB printer, use USB 1, no matter where it is connected to.
- USB 2. The second found USB printer. It may be a bit tricky to find out which is the first and what is the second, but we find having two USB printers connected to one PC/TC is very very rare.
- LPT 1. The first parallel port.
- LPT 2. The second parallel port.
- COM 1. The first serial port.
- COM 2. The second serial port.
- USBSerial 1. If you use a USB-to-Serial converter.
- Remote Printer. Use a remote/networked printer using the LPD protocol.
- Samba Remote Printer. Use a remote/networked printer using Windows printer sharing.
Windows printer driver name. This is for logical printer mapping of RDP and ICA protocols. If you type in the name of a Windows printer driver name, the Windows system that you are connecting to will know what driver to use. So you can choose from one of the printer drivers that are installed on the Windows system. The spelling must match the Windows driver name exactly.
PPD printer description file name. If you want to do local print job rendering, this is the name of the PPD file to use. You need to make sure the PPD file is present on the system.
Printer server name/address. If the printer port (see above) is set to 'Remote Printer' or 'Samba Remote Printer', then and only then this parameter has a meaning: the hostname or IP address where to find this remote printer.
Queue name on print server. If the printer port (see above) is set to 'Remote Printer' or 'Samba Remote Printer', then and only then this parameter has a meaning: the remote printer or print queue name.
TCP printing port. This refers to the raw printing protocol, or what is widely known as 'port 9100 printing'. If you set this parameter to 0, the functionality is disabled. If you set it to a non-zero value, the system will open a TCP port that will directly forward all communication to the printer. Most people will use the value of 9100 and configure Windows accordingly.
Windows username. If you choose to print to a remote Windows printer ('Samba Remote Printer') and your Windows system requires user authentication, type in the name of the user account here.
Windows user password. If you choose to print to a remote Windows printer ('Samba Remote Printer') and your Windows system requires user authentication, type in the name of the user's password here.
Windows user domain. If you choose to print to a remote Windows printer ('Samba Remote Printer') and your Windows system requires user authentication, type in the name of the user account's domain here.
Custom lp options. Here you can supply custom lp options. Normally this should not be necessary, but it gives you additional control over the system if you are willing to go more towards the Linux operating system level. Please see here for more information: lpoptions
Custom printcap options. In Linux terms, these printer definitions create a printcap file. With that parameter, you can add custom settings to the printcap. Normally this should not be necessary, if so, please look here for more information: printcap

NoTouch Center

Configuration in NoTouch Center works equally easy - same parameters, same options:

The only visible difference is that in NoTouch Center, the printer objects are already there - you don't have to click on 'Add new' as you do on the client. Up to four printer objects can be defined that way.

Toyota techstream software key. Note: Older versions of NoTouch Center (up to 4.1.25 use a more complicated approach). If, and only if, you use such a legacy version please check here: Legacy NoTouch Center Printer Configuration

Printing-related services in NoTouch

The main component handling printing is CUPS, the Common Unix Printing System. CUPS is enabled by default and can be controlled within the 'CUPS' parameters inside the 'Services' parameter subgroup. These parameters are available:

Start CUPS. This is the master switch for CUPS. Default is on, if you switch it off, all printing will be disabled.
Allow remote access. By default, CUPS will not listen on the network for security reasons. This will allow inbound CUPS-related communication to happen also via the network. (Note: For printing to remote printers, you do not need to enable this).

Second, there is the LPD component that implements the LPD/LPR functionality. Also under 'Services', there is the 'Start LPD' parameter, that is also on by default. If you switch it to off, no printing via LPD can happen (though raw printing will still work).

Printing scenarios

Printer mapping

This applies to the 'printer mapping function' of RDP, Citrix ICA/HDX and VMware Horizon View protocols only.

Create the printer object and assign a name such as printer1
- Set the port correctly
- For automatic printer driver assignment, please make sure the you have the correct driver installed in the VDI desktop / terminal server and you have typed it into the 'Windows printer driver name' parameter.
Make sure these parameters are on (either in the FreeRDP or the Citrix or VMware Horizon parameters, depending on connection mode) - see screenshot below:
- Local printer mapping
- Include system-defined printers in mapping
Make sure you all your terminal server policies and Citrix policies allow printer mapping - to this station, to this users. The #1 problem reason is having this disabled on Windows!

When logging into Windows, you'll see an auto-created printer now. You can use the regular Windows printer dialogs to print a test page.

NoTouch as a print server

Ncomputing Vspace Server

NoTouch can act as a print server using either LPD or Raw printing. In fact, by creating a printer object, it will be accessible via LPD automatically. For raw printing, you need to set the 'TCP port number' parameter to a meaningful value. Most people will chose 9100 here since this is the standard port on Windows.

Setting up the printer in Windows is easy. Create the printer, select a driver, and chose a remote port. Chose either 'Microsoft TCP/IP printing' or 'TCP raw printing' depending on if you want to use LPD/LPR or raw printing. Make sure you type in the correct host name or IP address.

An external guide for setting this up can be found here: Configuring Printserver Printing on Windows This external web page tells you to set LPR in step 7, should you prefer to use 9100/raw printing, then please select 'Raw' instead of LPR.

Printing from local applications

If you need to print from a local application, such as the builtin Firefox web browser, you have no Windows server that you can install printer drivers on. In that case, you must spool and render the jobs locally, requiring proper PPD files. However, there are just two things that need to be done:

Get a PPD file and upload it to the client by connecting with your PC's web browser to the NoTouch system
Set the name of the PPD file to the 'PPD printer description file name' parameter.

You can also use NoTouch Center to distribute PPDs. Put the PPD file on a web accessible folder somewhere in your network, and then type in the complete URL into the 'PPD pack URL' parameter under 'Drives/Printers'.

Notes

Make sure that the LPT or USB port is enabled in the PC's BIOS
When using the parallel (LPT port) make sure that the EPP (Enhanced Parallel Port) mode is defined in the PC's BIOS

Sekarang bagi para pengguna ncomputing yang menanyakan tentang unregister serial number Ncomputing maka kami mencoba membuat artikel tentang tutorial unregister serial number Ncomputing.

Kenapa harus unregister serial number ncomputing ? Unregister harus dilakukan bila kita ingin memindahkan client Ncomputing ke host atau server yang berbeda. Dikarenakan satuthin client Ncomputing hanya bisa digunakan di satu host aja.

Berikut caranya:

Pertama-tama masuk ke program Vspace, kemudian pada bagian kiri pilih menu Software Setting -> Information & Setting -> Serials Numbers

Akan muncul Serial Number Ncomputing yang terhubung / ter-registrasi ke host yang anda gunakan saat ini. Klik kanan Serial Number yang ingin di un-register, lalu pilih Unregister Now.

Kemudian muncul layar informasi mengenai client Ncomputing yang anda pilih beserta biodata yang dipakai untuk meregistrasikan client tersebut sebelumnya. Untuk melanjutkan klik tombol Next

Vspace akan menghubungi server Ncomputing (pastikan anda terhubung ke internet), tunggu sebentar dan bila prosesnya berhasil akan ada notifikasi sukses.

Bila langkah diatas berhasil lakukan, maka pada layar Serial Number kolom Register Status akan berubah dari Registered menjadi Expired.